We have tried to cover the most common terminals in use. Every effort has been made to give accurate directions. There can be slight variations based on processor programming. If yours is not listed or if you do not wish to attempt to do this yourself, please call me and I will be glad to assist.
VerifoneVX520 VX510 VX 3750
From Main or credit sale account screen
Press the green button or enter
This should bring you to a Configuration Screen
Press the set up key normally the F2 button
Enter pass word: One, then the Alpha Key twice then 66831, then enter or green button.
(The Alpha key is just below the screen middle button.)
Press “More Button” far left button under screen until you see Date/Time
Press F1 button, then setting the date comes up. Being the date is correct; you can press enter to bring up the time.
Note time should be in military time format. I.E. 1:00 pm is 13:00
After the date & time has been enter correctly, press the red key several times to get you back to the main sale screen.
PAX S80 & S90
If prompted for pass word, it is the current date. Format is mmddyyyy
Select “Menu” Key
System Setting should be showing if so select “5”
Date & Time should be showing if so select “1”
Then you will see a listing of the current date and time
Enter current date if what is showing is correct, press enter / green button
Then enter correct time. Note it is military time, then press enter / green button
Should bring you back System Setting, press red key to get back to sale screen
FD100 & FD50
From Main or credit sale account screen
Choose “system”, touch the screen
Next screen you should see “date / time”
Choose “date / time” by touching the screen for FD100 for a FD50 choose corresponding number
To take the curser over the time number you want to change use the arrow keys on earthier side of the “zero” of the number pad. Near bottom of terminal
Time should be in military time format. I.E. 1:00 pm is 13:00
Ingenica ICT 220 and ICT 250
Press the Function key, if it prompts for a password the PW is either 123456P (1234567F) or MW9416557
Then go to 0- Tellium Manager, and then to 3- Initialization
Select 1- Parameters and you will see the date and time prompt. Remember that this terminal runs on military time, and that the time zone must be accounted for
Ingenico 5100
From Main or credit sale account screen
Select Admin button (below the 9)
Choose 3 setup menu
Choose 1 quick set up
Clock should come up as your first choice.
Select edit and follow prompt by in putting date and time
Note time should be in military time format. I.E. 1:00 pm is 13:00
Verifone Omni 3730, 3740, 3750
From Main or credit sale account screen
Press the green button or enter
This should bring you to a Configuration Screen
Press the set up key normally the F2 button
Enter pass word: One, then the Alpha Key twice then 66831, then enter or green button.
(The Alpha key is just below the screen middle button.)
Press “More Button” far left button under screen until you see Date/Time
Press F1 button, then setting the date comes up. Being the date is correct; you can press enter to bring up the time.
Note time should be in military time format. I.E. 1:00 pm is 13:00
After the date & time has been enter correctly, press the red key several times to get you back to the main sale screen.
Omni 3200
From Main or credit sale account screen
Press “More Button” far left button under screen until you see other set up
Press enter at which time a pass word will be required.
Enter pass word: One, then the Alpha Key twice then 66831, then enter or green button.
(The Alpha key is just below the screen middle button.)
On next screen press “More Button” far left button under screen until you get to date/time
Time should be in military time format. I.E. 1:00 pm is 13:00
Nurit 2085, 8320, Wireless 8000 & 8020
From Main or credit sale account screen
Choose Menu
Scroll down to “systems options”, normally number 5, press enter
The first option to appear should be “Set Time/Date”, press enter
Current date and time should appear, press enter which will allow you to input new info
Note the format it will allow. Example year will only be 2 digit or “10”
Time should be in military time format. I.E. 1:00 pm is 13:00
Hypercom T7P
From Main or credit sale account screen
Choose Function 11, enter
Note if Function 11 does not allow to change time try Function 10 or 12
Pass Word: 0000, enter
Follow prompts.
Time should be in military time format. I.E. 1:00 pm is 13:00
When completed press cancel to exit and go back to the sale screen
Hypercom T7Plus, T4100, T4210 & T4220
From Main or credit sale account screen
Choose Function 10, enter
Note if Function 10 does not allow to change time try Function 11 or 12
Pass Word: 0000, enter
Follow prompts.
Time should be in military time format. I.E. 1:00 pm is 13:00
When completed press cancel to exit and go back to the sale screen
If you have any question about this, please feel free to contact us at 888-506-9225 or visit our website at: www.firstcoastpayments.com
